Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Ballwin, MO at a glance
Classic Aire Care has completed 20 jobs in Ballwin, MO between July 2026 and August 2026.
The most recent job was on August 10, 2026.
Classic Aire Care has completed 533 jobs in Ballwin, MO in the last 12 months.
Job Locations and Reviews
Completed comprehensive cooling system tune-up on two residential HVAC units located in yard side area, both under 10 years old. Performed standard preventive maintenance protocol including system inspection, filter evaluation, and operational testing on both units. Documentation photos captured air handler components and filter conditions during service visit.
Completed comprehensive cooling system tune-up on residential air conditioning unit located at side of home. Performed standard maintenance procedures including inspection of gas valve, blower motor assembly, electrical connections, and control board. All colored wiring connections were verified secure, circuit board functionality confirmed, and interior components found operating within normal parameters.
Responded to no cooling call on residential HVAC unit less than 10 years old located in side yard. Upon arrival, found outdoor condenser unit with severe deterioration of protective outer covering and insulation material, with large sections peeled away exposing the underlying coil fins. Documented equipment condition with photos showing extensive surface damage to unit housing while metal heat exchanger fins remained relatively intact. Advised customer that unit had been turned off per prior instructions due to warm air discharge from system.
Completed initial electrical installation for kitchen remodeling project. Installed new dimmer switch with proper mounting and wiring connections in wall cavity, ensuring secure placement within electrical box. Performed rough-in wiring work to support cabinet and lighting infrastructure for kitchen renovation phase.
Completed installation of replacement gas valve on furnace unit. Performed diagnostic testing using digital manometer to verify proper gas pressure and system operation. Unit tested successfully and restored to normal heating operation with all safety controls functioning properly.
Installed APCO X UV air purification system in HVAC unit and replaced existing drain line with 3/4" ID drain tubing to ensure proper condensate drainage. System tested and verified operational upon completion.
Responded to water leak from attic air handler unit. Upon arrival, customer had already shut off system as previously advised. Performed diagnostic inspection of both indoor and outdoor HVAC units. Exterior condenser units showed extensive debris accumulation on coil fins and surfaces, with heavy dirt, dust, and organic matter buildup restricting airflow. Documented equipment condition with photographs showing significant lack of preventative maintenance on both outdoor units. Identified source of attic water leak and provided recommendations for repair and ongoing system maintenance to prevent future issues.
Performed comprehensive plumbing stack replacement involving the separation of a shared drainage system into two independent stacks. Removed the master bathroom toilet and created access openings in the wet wall and basement soffit to facilitate the work. Demolished the existing plumbing stack from below the test tee through the sanitary cross, including all dedicated shower and tub drain runs. Installed new PVC plumbing stack system with separate dedicated drain lines for each toilet to eliminate shared drainage issues. Re-vented the first-floor system above the flood-level rim, which required core-drilling through one floor joist to properly route the new vent line into the wet wall cavity. All pipe connections were secured with appropriate fittings and elbows to ensure proper drainage flow and venting performance. Reinstalled both toilets and secured all fixtures. Installed code-compliant fire blocking at all structural penetrations where plumbing passes through floor joists and w
Responded to service call for rapidly soiling air filter on basement HVAC unit over 10 years old. Upon inspection, confirmed filter installed less than two weeks prior was completely blackened, indicating excessive dust contamination in the system or ductwork. Documented condition of both the contaminated filter and surrounding floor area showing significant dirt accumulation near the air handler and return vent. Identified potential issues with duct leakage or inadequate sealing allowing unfiltered air and debris to bypass filtration system. Recommended thorough duct inspection and cleaning to address source of excessive particulate matter entering the system.
Responded to no-cooling complaint and found condenser unit not running. Performed electrical diagnostics using clamp meter, measuring 211 AAC at the outdoor unit's electrical connections to verify power supply and identify failure point in the system.
Performed site evaluation of Lennox air conditioning condenser unit located on side of home to assess leveling requirements. Unit currently sits on concrete pad with visible settling concerns. Conducted thorough inspection of outdoor condensate unit positioning, verified proper clearances from structure, and examined refrigerant line connections and electrical conduit routing. Documented current installation condition with photographs and provided estimate for re-leveling service to ensure proper unit operation and drainage.
Responded to no cooling complaint on 10+ year old system located in basement. Upon arrival, advised customer to shut off AC unit and leave fan running to prevent further issues. Performed diagnostic inspection of furnace and HVAC system, documented equipment condition with photos showing open furnace access panel and internal components for service records.
Responded to no-heat call with blank thermostat display in hallway location. Upon inspection, found failed thermostat with no power to display. Removed existing thermostat from wall plate, exposing wiring connections at mounting base. Installed new replacement thermostat control board and verified proper wiring connections to system. Tested unit operation and confirmed thermostat display functioning correctly and HVAC system responding to calls for heating and cooling.
Completed comprehensive whole home electrical inspection with 30-minute advance notification as requested. Thorough evaluation included exterior utility meter installation, main electrical panel, circuit breaker configuration, and overall system integrity. Documented all findings with detailed photography of the meter assembly mounted on exterior brick wall and main service panel showing organized wire management, proper color-coding of conductors, and breaker arrangement. All components were found to be professionally installed with appropriate wire routing and connections at main disconnect and individual circuit breakers.
Responded to no cooling complaint where outdoor unit was running but no air flow from indoor unit. Upon inspection, discovered evaporator coil completely frozen with heavy ice buildup on copper tubing. Identified restricted airflow as root cause due to severely clogged air filter. Advised customer to power down system to allow coil to thaw completely. Replaced dirty air filter with new filter and verified proper airflow once ice melted. Tested system operation and confirmed normal cooling function restored with adequate airflow throughout. Recommended regular filter changes every 30-90 days to prevent future freeze-ups.
Responded to no cool call on residential air conditioning unit. Upon arrival, found AC system not producing cold air as reported. Performed diagnostic evaluation of outdoor condensing unit and indoor air handler. Inspected electrical disconnect box mounted on exterior, noting weathered condition but functional operation. Checked refrigerant lines, electrical connections, and system controls. Additionally addressed reported clogged condensate drain line in basement serving the furnace humidifier system. Cleared blockage from water line to restore proper drainage. Documented equipment condition with photos showing outdoor unit installation on concrete pad with weathered siding and exterior components. System evaluated and necessary repairs identified for restoring cooling operation.
Returned to property to reposition appliances following previous day's HVAC service work. Adjusted equipment placement to customer's specifications and verified all components were properly situated. Documented final ductwork installation with photos showing metallic duct panels and flexible duct connections in satisfactory condition.
Responded to no cooling complaint following power restoration. Upon inspection, found control board wiring connections compromised. Inspected circuit board terminals and wire connections at terminal strip, verified proper wire routing and secure connections to control board. Tested system operation, restored cooling functionality, and confirmed all electrical connections were properly seated and secure.
Responded to callback for 10-year-old AC unit not cooling with indoor temperature at 75°F. Upon arrival, thermostat displayed 84°F with system in off mode. Inspected control board and wiring connections in air handler, verified all wire terminations at circuit boards and wire nut connections were secure. System tested and restored to normal cooling operation.
Responded to no cooling complaint on unit 10 located at side of home. Upon arrival, found system unable to maintain temperature below 80 degrees with unit shut off and only fan running. Performed diagnostic evaluation of the HVAC system to identify cause of cooling failure and provided repair recommendations to restore proper operation.
