Plumbing, Furnace, & Air Conditioning Services in Ballwin, MO

Responded to no cooling call on 5-year-old Lennox system affecting entire home. Upon arrival, inspected unit and found heavily soiled air filter restricting airflow, which was causing system shutdown. Replaced filter with new FILTERBUY unit, restored proper airflow, and verified system operation with normal cooling restored to all zones.

Responded to no cooling complaint on 11-year-old Trane system. Upon inspection, found outdoor unit's condenser coil heavily impacted with dust, dirt, and fibrous debris accumulation, severely restricting airflow and reducing heat exchange efficiency. Cleaned condenser coil thoroughly, removed debris buildup from unit interior, and verified indoor air handler grille condition. System airflow restored to proper operation, cooling function confirmed operational upon completion.

Responded to no-cool service call on 7-year-old Carrier split system at unit D. Upon inspection, found evaporator coil heavily soiled with accumulated dirt, debris, and microbial growth restricting airflow. Coil fins showed significant discoloration with dark staining throughout. Drain pan exhibited rust staining and degraded foam insulation at connection points, indicating prolonged moisture exposure and lack of routine maintenance. Cleaned evaporator coil assembly, cleared condensate drainage system, and restored proper airflow. System tested and returned to normal cooling operation.

Completed comprehensive whole-home electrical inspection as part of Elite preventive maintenance agreement. Thoroughly examined main electrical panel, documenting breaker configuration, circuit labeling, wire connections, and overall system condition. Panel inspection revealed properly organized circuit breakers with handwritten identification labels, adequate wire management at service entry points, and functional bus bar connections. Photographed panel interior showing multiple circuit breakers, surge protection device, and color-coded wiring including black, white, yellow, brown, and copper conductors entering through conduits. Noted minor dust and debris accumulation at panel base requiring routine cleaning. All breakers appeared operational with visible amperage ratings. Panel enclosure showed good overall condition with no signs of rust, damage, or deterioration to mounting hardware or interior components.

Responded to no cooling complaint on 10+ year old elevated side-mounted condensing unit. Upon arrival, performed system diagnostic and found outdoor unit not operating while indoor air handler fan continued to run as instructed. Inspected outdoor electrical disconnect, capacitor, and associated wiring connections. Evaluated refrigerant line set condition and verified proper insulation coverage. Assessed indoor air handler installation including ductwork connections and cabinet integrity. Documented equipment condition with photos of both indoor and outdoor components for service records.

Responded to commercial water heater leak located above ceiling in bathroom area. Removed failed 20-gallon electric water heater from ceiling-mounted installation and replaced with new 7-gallon electric unit. Accessed work area via ladder through ceiling opening, navigated confined attic space with existing mechanical equipment and framing. Connected electrical supply, installed water supply lines, and verified proper operation of new compact water heater. Cleaned work area and removed old unit from premises.

Completed comprehensive cooling system tune-up on 10-year-old residential split system with ground-level condenser and basement air handler. Performed standard maintenance protocol including filter inspection, electrical connection verification, refrigerant line examination, and condenser coil assessment. Noted significant dirt and debris accumulation on exterior condenser unit requiring attention to maintain optimal heat transfer efficiency and system performance.

Responded to no-cool call for 11-year-old Rheem system with reported loud noises from outdoor unit. Upon arrival, contacted customer per request and performed diagnostic inspection of outdoor condenser unit to identify source of noise from either fan motor or compressor assembly. Inspected indoor air handler, ductwork connections, and refrigerant lines in basement mechanical area for related issues. Documented system condition with photos showing ductwork installation and basement HVAC infrastructure. Determined cause of operational concern and provided customer with findings and repair recommendations to restore proper system function.

# HVAC Service - No Cool U10 Responded to no cooling complaint on Daikin system with unit located in attic and condenser at ground level. Upon arrival, checked thermostat error history which displayed fault codes B3 and 14, indicating blower motor operational issues and high pressure faults in the air conditioning system. Inspected outdoor condensing unit and removed access panel to examine internal components. Found condenser coils showing dust accumulation and discoloration, with fan assembly accessible for evaluation. Verified error codes correlated with high pressure condition likely caused by restricted airflow through dirty condenser coils. System required cleaning and further diagnostics to restore proper cooling operation.

Responded to no cooling complaint on three-year-old Lennox system. Upon arrival, thermostat displayed 84°F indoor temperature with setpoint of 69°F and system actively calling for cooling. Outdoor condenser unit showed significant dirt accumulation and debris on coil fins with visible streaking and discoloration affecting heat transfer efficiency. Performed diagnostic evaluation and determined dirty condenser coil was restricting airflow and preventing proper heat rejection, causing reduced cooling capacity and extended run times.

Responded to no cool air complaint on secondary system of dual-zone HVAC setup. Upon arrival, contacted customer to shut down AC unit and provided 30-minute advance notice before service. Diagnosed 20+ year old ground-level unit located on side of home and documented equipment condition with photos of installation area.

Responded to no cooling complaint on 7-year-old residential air conditioning system. Upon arrival, performed temperature diagnostics at supply and return registers. Measured supply air temperature at 53°F and temperature differential of 25°F across the system, indicating the unit was operating within normal parameters and cooling effectively. System found to be functioning properly with adequate airflow and appropriate temperature split, suggesting no mechanical issues present at time of service call.

Responded to service call for cooling system not reaching set temperature on unit under 10 years old located in side yard. Upon arrival, performed diagnostic evaluation of the HVAC system per customer's reported issue. System was assessed and customer had previously been advised to turn unit off and leave fan on auto mode.

# HD#F60941403 Responded to no cooling complaint on 10+ year old air conditioning system. Upon arrival, confirmed condenser fan motor was not operating. Customer reported ability to manually spin fan blade, but noted excessive noise when doing so, indicating failing motor bearings. Performed diagnostic evaluation of outdoor condensing unit. Testing revealed failed run capacitor preventing fan motor from starting. Capacitor showed no measurable capacitance and visible signs of deterioration. Additionally, condenser fan motor exhibited mechanical resistance and bearing failure, confirmed by manual rotation test and abnormal noise levels. Replaced dual run capacitor with proper MFD-rated component to manufacturer specifications. Installed new condenser fan motor assembly with correct horsepower and RPM ratings for unit. Secured all electrical connections to capacitor terminals and motor leads, ensuring proper wire routing and strain relief. Connected refrigerant manifold gauge set to

Responded to emergency call for temporary cooling unit installation while customer awaits permanent AC replacement. Existing system experiencing repeated breaker trips, rendering it inoperable. Installed temporary cooling equipment, verified proper electrical connections and breaker compatibility, and replaced air filter to ensure optimal airflow and system performance.

Responded to report of excessive water leakage from 10-year-old basement air handler unit with water migration to adjoining room causing carpet saturation and strong odor. Upon arrival, inspected indoor air handler and found active condensate drainage issue. Examined outdoor condenser unit coil, noting significant dirt and debris accumulation on fins requiring attention. Inspected air handler cabinet and confirmed Filtrete 1550 filter (16x25x4) in place with visible dust buildup on housing. Documented equipment condition with photos showing soiled condenser coils and filter assembly area. Identified condensate system malfunction as source of water leakage affecting basement flooring and adjacent carpeted area.

Replaced failed compressor on outdoor condensing unit with serial number 1917e41199. Recovered refrigerant from system, removed and retained old compressor for warranty claim purposes, installed new replacement compressor, evacuated system to proper vacuum levels, and recharged unit with appropriate refrigerant type and quantity. Verified proper operation of all system components, confirmed adequate airflow across condenser coil, and documented installation with photographs of both old and new compressor as required. Unit tested and left operational with normal temperature differential and pressures within manufacturer specifications.

Responded to reported humidity issues on HVAC system under first-year warranty. Inspected and photographed control board configuration, including DIP switch settings and electronic components to verify proper indoor air quality system setup. All control board parameters were documented for humidity control optimization.

Completed electrical estimate for kitchen and great room area requiring installation of recessed lighting fixtures in ceiling and relocation of existing stove circuit. Assessment revealed ceiling damage present in work area that will need to be addressed prior to final electrical installation. Provided detailed estimate for wiring new recessed can lights throughout ceiling space and relocating 240V range circuit to new position per specifications.

Responded to callback for 3-year-old Lennox AC system with complete loss of cooling affecting entire home. Unit had been previously serviced in June but issue recurred. Upon arrival, performed comprehensive system diagnostics including electrical checks at service panel, inspected refrigerant lines and condensate drainage system in basement utility area. Verified proper P-trap configuration and drain line functionality to ensure no secondary issues affecting system operation. Documented equipment conditions and installation components with photos for warranty and service history records. System restored to full operational status with cooling confirmed throughout home.