Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Ballwin, MO at a glance
Classic Aire Care has completed 20 jobs in Ballwin, MO in August 2026.
The most recent job was on August 17, 2026.
Classic Aire Care has completed 533 jobs in Ballwin, MO in the last 12 months.
Job Locations and Reviews
Replaced a non-functional 20+ year old gas water heater with a new 40-gallon gas tall unit, including installation of a new expansion tank and 3/4" pressure reducing valve (PRV). All copper piping connections were completed to code, with proper venting installed, and work was performed under city permit requirements.
Replaced failed blower motor and performed thorough cleaning of blower wheel assembly in HVAC system. Removed old motor from housing, cleaned accumulated dust and debris from squirrel cage blower wheel, and installed new replacement motor with proper electrical connections. System tested and confirmed operational upon completion.
Performed end-of-season cooling tune-up on 2-year-old Lennox heat pump unit. Upon arrival, found significant accumulation of dirt, debris, pollen, and organic matter on both condenser coil and heat exchanger panels, with visible algae and mildew growth restricting airflow through fins. Completed comprehensive system inspection including electrical connections, refrigerant pressures, and operational controls—all parameters within manufacturer specifications with no mechanical issues identified. Thoroughly cleaned condenser coils and heat exchanger fins to remove buildup and restore proper airflow and heat transfer efficiency. Unit is operating properly and ready for continued service.
Completed comprehensive preventive maintenance tune-up on 2-year-old Lennox cooling system with warranty valid through July 2027. Performed full system inspection including indoor evaporator coil assembly, refrigerant lines, electrical connections, and outdoor condenser unit. All components found operating within manufacturer specifications with no deficiencies noted; system confirmed to be in proper working condition.
Responded to no cooling complaint on 6-year-old Lennox unit that developed high-pitched sound before losing cooling capacity. Diagnosed failed compressor contactor causing unit malfunction. Replaced defective contactor, verified proper voltage and amperage to compressor, tested system operation through complete cooling cycle, and replaced dirty air filter with new Vortex pleated filter to restore proper airflow. System returned to normal operation with no abnormal sounds and adequate cooling output.
Responded to no cooling complaint for upstairs unit 10 located in backyard. Upon arrival, performed diagnostic evaluation and found condenser coils heavily soiled with dirt and debris accumulation, restricting airflow and reducing heat transfer efficiency. Measured system temperatures and pressures using digital manifold gauges, confirming reduced cooling capacity due to dirty coil condition. Condensate drain system was also inspected at indoor air handler. Recommended thorough coil cleaning and system maintenance to restore proper cooling operation for upstairs zone.
Responded to no cooling complaint on 10+ year old residential AC unit located at side of home. Upon arrival, confirmed unit was blowing warm air with suspected low refrigerant charge. Connected Fieldpiece SMAN manifold gauges to service ports and performed system pressure diagnostics. Readings indicated abnormal operating pressures with high superheat of 54°F and subcooling of 11.6°F, confirming significant refrigerant undercharge. Inspected accessible refrigerant lines and evaporator coil area for potential leak sources. System was shut down per customer request pending approval for leak detection service and refrigerant recharge repairs.
Responded to no cool call on 8-year-old outdoor unit. Upon arrival, found unit with severely clogged and debris-laden filter panel restricting airflow to condenser coil. Removed access panel, inspected refrigerant lines and internal components. Cleaned accumulated dirt and debris from filter media and surrounding compartment. Verified condenser coil fins and refrigerant lines were intact with no visible damage. Restored proper airflow to unit, resolving cooling issue.
Responded to reported sparking from outlet in dining room area near overhead light fixture. Inspected electrical panel to verify circuit integrity and proper breaker operation for affected dining room circuits. Panel inspection revealed standard residential configuration with properly labeled breakers including GFCI/AFCI protection at lower positions, confirming electrical distribution system was functioning within normal parameters.
Responded to water leak originating from plumbing stack where no-hub band coupling had failed. Inspected the leaking connection, documented conditions with photos, and successfully repaired or replaced the defective no-hub band to restore proper seal and eliminate water leakage from the stack assembly.
Responded to no cooling call on 8-year-old air conditioning system. Upon arrival, confirmed system was completely non-operational. Accessed control panel and inspected electrical components, circuit boards, and wiring harness. Identified failed control board preventing system operation. Replaced defective PCB with new circuit board, verified all electrical connections, and tested relay operation. Restored power to unit and confirmed proper system startup and cooling operation. System now functioning normally with all safety controls operational.
Responded to customer report of squeaking noise from cooling system. Upon inspection, found heavily clogged air filter with significant dust and debris accumulation restricting airflow to the AIREFLO furnace unit. Replaced dirty filter with new filter to restore proper system airflow and eliminate noise issue caused by restricted air movement through the HVAC system.
Completed comprehensive cooling tune-up on single outdoor AC unit located in backyard. During inspection, discovered significant frost accumulation on evaporator coil and supply ductwork in attic space, indicating restricted airflow or possible refrigerant issue. Documented conditions with thermal measurement readings and photographed frosted components and internal air handler assembly including blower motor, electrical connections, and insulated plenum. Addressed airflow restriction, verified proper system operation, and ensured unit returned to normal cooling function.
Responded to no-cool call on 10-year-old upstairs AC system. Upon arrival, found outdoor condenser unit with heavily soiled mesh guard and significant debris accumulation restricting airflow. Performed thorough cleaning of condenser coils and protective mesh guard, removed accumulated dirt, dust, and organic debris from unit exterior and surrounding area. Verified proper airflow restoration, checked refrigerant pressures, and tested system operation. Unit returned to normal cooling function with adequate airflow through condenser. Recommended regular maintenance to prevent future airflow restrictions.
Responded to no cooling complaint on ground-level unit U10. Upon arrival, inspected control board and found faulty circuit board preventing proper system operation. Examined condenser coil fins and verified outdoor unit components were intact. Diagnosed failed control board as root cause of cooling failure and documented system conditions with photos of control board wiring and outdoor unit configuration for warranty and repair documentation purposes.
Completed comprehensive cooling system tune-up on a 10-year-old single AC unit. Performed standard maintenance protocol including inspection of outdoor condenser unit, verification of electrical connections and wiring integrity, assessment of refrigerant levels, and evaluation of overall system operation. Unit found to be in functional condition with no immediate repairs required at time of service.
Responded to no heat call on residential HVAC system over 10 years old located in backyard. Upon arrival, performed tune-up inspection on cooling system and diagnosed furnace failure to ignite. Used Fieldpiece diagnostic meter to test electrical components and verify proper voltage and amperage readings. Identified faulty ignition system preventing furnace operation. Replaced defective ignitor assembly and verified proper flame sensor operation. Inspected air filter condition and checked airflow through pleated filter media. Tested system startup sequence and confirmed furnace now cycles properly with successful ignition and heat output. System restored to full operational status.
Responded to no cooling complaint on outdoor unit U10. Upon arrival, confirmed air handler fan operational but system not producing cold air. Inspected evaporator coil and found significant dirt and debris accumulation restricting airflow through fins. Coil showed no signs of freezing or frost formation as initially reported. Documented coil condition with photos showing heavy dust buildup in corrugated fin sections. Cleaned evaporator coil thoroughly to restore proper heat exchange and airflow. Verified system operation after cleaning, with unit now cooling properly and achieving target temperatures.
Responded to no cooling call on residential air conditioning system over 10 years old. Upon arrival, confirmed compressor was humming but not starting, indicating a failed start capacitor or compressor motor issue. Diagnosed hard start condition on outdoor condensing unit located in side yard, inspected electrical components and determined compressor required replacement or capacitor service to restore cooling operation.
Completed cooling system tune-up on a single outdoor unit located in side yard, over 10 years old. Performed standard maintenance protocol including inspection of all major components, verified proper airflow through ventilation system, and documented equipment condition with photos. System operating within normal parameters upon completion.
