AC, Furnace & Plumbing Services in St. Charles, MO

Responded to no-heat call on furnace system located in basement. Upon inspection, found blower assembly with significant dust accumulation on centrifugal fan blades and housing. Cleaned blower wheel thoroughly, verified proper motor operation, and confirmed Honeywell thermostat was functioning correctly and calling for heat at 73°. System restored to normal operation with adequate airflow and ignition sequence completing successfully.

Returned to address frozen evaporator coil condition initially diagnosed on previous visit. Documented extensive frost and ice buildup on refrigerant lines and metal panel surfaces, indicating potential refrigerant restriction, airflow deficiency, or system charge issues. Collected photographic evidence of ice accumulation on line penetrations and surrounding components for repair recommendation and customer approval before proceeding with corrective measures.

Completed cooling system tune-up and preventative maintenance on 16-year-old outdoor condenser unit. Performed comprehensive inspection of heat exchanger coils, which showed moderate dirt and debris accumulation between aluminum fins requiring attention. Evaluated overall unit operation, checked refrigerant levels, tested electrical connections, inspected fan motor and blade assembly, and verified proper airflow through ventilation slats. Unit operational upon completion with recommendations provided for ongoing maintenance to ensure optimal efficiency.

Completed comprehensive cooling tune-up on a 10-year-old residential air conditioning unit located on the side of the home. Performed standard maintenance protocol including visual inspection of condenser unit, electrical testing with digital multimeter showing proper amperage readings, and verification of system operation. Unit found to be in satisfactory working condition with no immediate repairs required.

Responded to no cooling complaint on 10+ year old ground-level unit where compressor was not engaging and only warm air was circulating. Upon arrival, found outdoor condenser coils heavily clogged with dirt, dust, debris, and cobweb accumulation restricting airflow through the fins. Cleaned condenser coils, removed debris buildup, and restored proper system operation with compressor now cycling correctly and cold air delivering to living space.

Responded to no cooling call on 4-year-old ground-level system displaying error codes 184.07 and 24.08 with complete unit failure. Upon arrival, found outdoor condenser coil heavily caked with dirt, dust, and debris causing significant airflow restriction and impaired heat exchange capability. Performed thorough coil cleaning to restore proper airflow and system operation. Inspected indoor air return grille and verified adequate airflow at air handler. Cleared fault codes, cycled system through complete operational test, and confirmed unit returned to normal cooling operation with proper temperature differential across coil.

Completed preventive maintenance tune-up on single residential AC unit. Performed standard system diagnostics including temperature differential measurements, verified proper airflow with filter inspection showing 16x20x1 filter size, and assessed condensate drainage system. Noted excessive condensation present on evaporator coil access panel, indicating system is operating and removing humidity from conditioned space effectively.

Completed electrical estimate for bathroom remodeling project involving relocation of existing outlet and installation of GFCI protection. Assessed current electrical configuration with exposed switch and outlet boxes, documented existing wiring conditions, and provided specifications for code-compliant GFCI outlet installation to meet bathroom safety requirements.

Completed annual cooling maintenance on a 9-year-old Trane AC system. Performed comprehensive tune-up including system inspection, verified thermostat operation displaying 74° setpoint with system idle status and proper humidity readings at 49%. Inspected and documented FILTERBUY pleated air filter showing good condition with clean media. All components operating within normal parameters, system functioning properly with no issues identified.

Completed comprehensive preventive maintenance on two 9-year-old air conditioning systems, performing full AC tune-up procedures on both units. Inspected and replaced air filters, verified proper system operation, checked refrigerant levels, cleaned components, and confirmed both systems are functioning correctly with no issues identified.

Completed comprehensive cooling season tune-up on 8-year-old residential air conditioning system. Performed standard maintenance protocol including condenser coil inspection, refrigerant level verification, electrical connection testing, and airflow assessment. Unit operational and ready for cooling season, with condenser showing normal weathering consistent with outdoor exposure.

Completed comprehensive electrical inspection of residential property. Performed thorough evaluation of main electrical panel, documenting interior breaker configuration with approximately 12-14 standard residential circuit breakers mounted on bus bars, assessed wire management and routing of multiple conductors throughout panel enclosure. Inspected exterior electrical service equipment including meter housing, protective enclosures, and associated conduit system running across building exterior siding, verifying proper mounting and connections to service panel. Documented all findings with detailed photography for homeowner records.

Completed preventative maintenance tune-ups on two outdoor cooling units located in the backyard. Performed comprehensive inspections of both systems, including evaluation of electrical components, capacitors, wiring connections, and condenser coils. Both units showed normal wear consistent with outdoor exposure, with some dirt and debris accumulation on exterior surfaces and coil fins that was addressed during the service visit.

Completed cooling system tune-up on single outdoor AC unit. Inspected air filter which showed moderate dust accumulation, checked indoor air handling components with visible condensation on ductwork indicating normal operation, and examined outdoor condenser unit with fan grille and louvered panels showing minor weathering. All components operational and system running within normal parameters.

Completed comprehensive cooling system tune-up on two residential HVAC units located in side yard, both under 10 years old. Performed standard preventive maintenance procedures including system inspection, refrigerant level verification, electrical component testing, and airflow measurements with digital thermometer recording supply air temperature of 50.5°F. Replaced heavily soiled 16x25x4 air filter showing significant dust and debris accumulation with new filter to restore proper airflow and system efficiency, with second unit also receiving fresh filter installation.

Installed customer-provided bidet attachment to existing toilet and repaired leaking shower head by replacing worn washers and tightening connections. Verified all plumbing connections were secure with no leaks and confirmed proper water flow to both fixtures upon completion.

Completed troubleshooting and circuit diagnostics on residential electrical system. Testing confirmed proper voltage at 121 VAC with correct wiring polarity and grounding at outlet locations. All circuits verified operational and within safe parameters.

Completed preventative maintenance tune-up on two 4-year-old residential air conditioning units located at ground level and basement. Performed comprehensive inspection of both systems including blower motor assemblies, electrical connections, and wiring harness integrity. Evaluated and documented condition of air filtration system, noting pleated filter media with evidence of normal operational use. All internal components, electrical connections, and mechanical systems inspected and found operating within manufacturer specifications.

Completed comprehensive cooling maintenance inspection on HVAC system. Performed temperature diagnostics using digital meter, recording supply air temperature of 169°F and return air temperature of 68°F, confirming proper system operation and adequate temperature differential. Documented equipment conditions with photographs for service records.

Responded to urgent service alarm code 163 on recently installed Lennox system. Upon arrival, unit was operational but displaying fault code. Diagnosed and cleared alarm code, inspected refrigerant lines and mounting components for proper installation and secure connections. Verified system operation, confirmed all components functioning within normal parameters, and documented equipment condition with photos under first-year warranty coverage.