Heating, Cooling, and Plumbing Services in Chesterfield, MO

Completed comprehensive Supertune maintenance on a 5-year-old split system including both air conditioning unit and furnace. Performed full system inspection of outdoor condenser unit located in backyard at ground level and basement-mounted furnace. Conducted standard tune-up procedures including cleaning, testing, and adjusting both heating and cooling components. Verified thermostat operation showing 69°F room temperature with proper system controls functioning. Observed frost or crystalline buildup along ductwork seam joints, indicating possible condensation issue or refrigerant leak that may require future monitoring. Documented system conditions with photographs for service records. All equipment operational at time of service completion.

Completed comprehensive tune-up and maintenance service on two HVAC units located in basement. Performed standard preventive maintenance procedures including inspection of all major components, cleaning of burner assembly, and testing of ignition system. Inspected and serviced flame sensor to ensure proper operation and system safety.

Completed comprehensive Supertune maintenance service on two HVAC systems located in basement and ground level areas. Performed full system inspection, cleaned and tested both furnaces and air conditioning units, checked refrigerant levels, inspected electrical connections, calibrated thermostats including Trane programmable unit, replaced filters, and verified proper operation of all components. Customer-maintained humidifier was inspected and serviced as part of the preventive maintenance agreement.

Removed and disposed of non-functional dehumidifier unit from basement mechanical room. Installed new E80 dehumidifier with proper ductwork connections, integrating unit into existing ducted system to match previous configuration. Two-person crew required to safely transport equipment down stairs and complete installation in utility space.

Completed heating tune-up on basement furnace unit as part of seasonal maintenance special. Performed comprehensive system inspection including filter examination, blower assembly check, and verification of all mechanical components. All systems found operating within normal parameters with no immediate service needs identified.

Responded to reported water leak originating from furnace system in utility closet. Upon inspection, identified condensate drainage issue affecting the HVAC unit. Cleared condensate line obstruction, verified proper drainage flow, and confirmed no further water accumulation from the system.

Performed comprehensive tune-up and maintenance on a 2-year-old Lennox air conditioning system operating within normal parameters. Inspected air filter in attic air handler, which showed moderate dust accumulation consistent with normal usage; verified proper installation and secure mounting within filter housing. Confirmed Sensi thermostat functionality with accurate temperature readings at 74°F and system controls responding appropriately in off mode.

Completed heating maintenance tune-up on a 9-year-old HVAC system that was operating properly upon arrival. Performed standard preventative maintenance procedures including system inspection, replaced air filter (20x25x1), verified thermostat operation and calibration on Honeywell Home unit, and confirmed all mechanical and electrical components were functioning within normal parameters.

Responded to no cooling call for second floor system with dim thermostat display. Upon arrival, found thermostat experiencing low power issue despite battery replacement. Diagnosed and resolved power supply problem to thermostat, restoring proper operation to the two-unit HVAC system.

Completed comprehensive cooling system tune-up on single AC unit located in interior utility closet. Performed standard maintenance procedures including system diagnostics with digital multimeter, electrical testing of components, and inspection of air handler and ductwork connections. All equipment found to be operating within normal parameters with no issues identified during service visit.

Completed heating tune-up on basement furnace unit under ten years old. Performed comprehensive system inspection including internal component examination, sensor verification, and ductwork inspection using borescope camera to assess interior condition. All components found operational with normal dust accumulation; system tested and confirmed functioning properly.

Reviewed architectural and electrical power plans for a multi-court sports facility featuring seven individual courts with supporting auxiliary spaces. Documented permit set electrical drawings including power distribution layouts, general electrical notes, and specifications for the entire property. Updated project timeline to 8-12 week timeframe and captured photographic documentation of construction plans for comprehensive electrical estimate preparation.

Completed comprehensive heating and cooling tune-up on Lennox furnace unit located in basement. Performed full system inspection including blower assembly, electrical connections, and internal components with access panel removed for thorough evaluation. Verified proper operation of PVC intake and exhaust venting system. Inspected and tested Aprilaire humidistat and PRO digital thermostat for proper functionality and calibration. System found to be operating within normal parameters with all components functioning as designed.

Completed scheduled heating tune-up on Amana furnace unit located in basement utility area. Performed comprehensive system inspection, cleaned and tested all components, verified thermostat operation showing 77°F, and confirmed proper airflow through ductwork. All equipment operating within manufacturer specifications with no issues identified.

Responded to no cooling call for two 10+ year old units located in side yard. Upon arrival, found both systems unable to maintain set temperature as reported. Performed diagnostic evaluation on both units using digital meter to check system pressures and operational parameters. Reading of 29.80 indicates low refrigerant charge on at least one system. Inspected indoor components including copper refrigerant lines, PVC condensate drain, and associated mechanical infrastructure in utility area. Both systems showed signs of age-related wear with tarnished copper piping and general deterioration. Units had been shut off per prior instruction. Documented equipment condition and diagnostic findings with photos. Provided customer with repair recommendations to restore proper cooling operation for both units.

Successfully installed a 50-gallon power vent Bradford White water heater in basement utility area with proper copper piping connections and expansion tank integration. Completed installation under permit 26PLU-19111 with permit ID sticker affixed to unit, documented expansion tank pressure settings as required, and utilized extension ladder to accommodate 10-foot ceiling height for overhead plumbing connections. All work performed to code with grade-level access, resulting in fully operational water heating system with proper venting and safety compliance.

Completed comprehensive furnace tune-up on 2014 basement unit per Home Depot service agreement. Performed full system inspection including heat exchanger examination, blower assembly evaluation, and thermostat functionality verification with Nest smart thermostat control system. All components found operating within normal parameters with routine maintenance completed successfully.

Responded to no cooling complaint on 5-year-old downstairs unit (U10). Performed diagnostic testing using digital multimeter, obtaining voltage readings of 110.6V and 9.9V at system components. Conducted electrical measurements to identify potential power supply or control circuit issues affecting cooling operation.

Replaced two existing thermostats with new White-Rodgers programmable units on both HVAC systems. Installed clean white thermostats, verified proper wiring connections, configured temperature settings, and confirmed both units were operating correctly with systems responding to temperature calls.

Completed installation of Energy Star certified tankless water heater system in utility room with proper venting, pressure tank integration, and condensate management. Installed all required copper supply piping with corrugated flexible connectors, PVC venting system extending through ceiling with secure mounting brackets and wooden support, and metallic condensate drain pan beneath unit. Secured all piping with appropriate black pipe straps and wall-mounted blue pressure tank for system operation. Applied permit sticker per permit #26PLU-18741 under license #P8730. All connections tested and system commissioned for proper operation.