Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Ballwin, MO at a glance
Classic Aire Care has completed 20 jobs in Ballwin, MO between August 2026 and September 2026.
The most recent job was on September 4, 2026.
Classic Aire Care has completed 533 jobs in Ballwin, MO in the last 12 months.
Job Locations and Reviews
Responded to service call for clogged bathtub drain in main bathroom. Upon arrival, assessed the drainage issue and successfully cleared the obstruction using a drain snake auger. Verified proper water flow and drainage functionality upon completion, restoring the fixture to normal operation.
Performed comprehensive AC tune-up on 2007 Amana outdoor unit at single-story ranch home. Removed unit cover for access and completed standard cooling season maintenance inspection. Documented electrical readings with multimeter and inspected indoor air filter, which showed moderate dust accumulation. Coordinated with homeowner regarding upcoming ductwork cleaning scheduled for July 7th to ensure continuity of service.
Completed cooling season tune-up on 12-year-old basement air conditioning unit. Performed comprehensive system inspection including blower motor assembly, control board connections, and electrical components; all wiring connections verified secure with no signs of overheating or damage. Inspected existing air filter showing moderate dust accumulation and recommended replacement to maintain optimal airflow and system efficiency.
Responded to no cooling call on York condensing unit approximately one year old affecting entire home. Upon arrival, performed system diagnostics and inspected indoor evaporator coil and refrigerant lines in basement utility area. Verified proper electrical connections, checked refrigerant pressures, and assessed airflow through the system. System restored to normal cooling operation and confirmed adequate temperature differential across evaporator coil.
Responded to callback for unusual noise from Lennox air conditioning system following morning service. Inspected outdoor condenser unit and determined noise was caused by debris lodged in fan assembly. Removed obstruction, verified proper fan operation and clearances, and confirmed system running quietly with normal sound levels. Unit tested through full cooling cycle with no abnormal operation detected.
Completed comprehensive tune-up service on a 10-year-old residential air conditioning system located at exterior side of home per Home Depot work order #F61804547. Performed standard maintenance protocol including inspection of outdoor condenser unit, internal components, electrical connections, blower motor assembly, and control board functionality. All system components found operational with routine maintenance completed and unit returned to service.
Responded to water leak in ceiling at condominium building. Removed existing failed water heater and installed new 40-gallon gas tall water heater with drain pan. Connected copper supply lines with brass fittings and shut-off valves to water heater inlet and outlet. Installed pressure relief valve and discharge piping per code requirements. Connected closet-vent system with proper venting configuration using galvanized ductwork. Applied required plumbing identification sticker and obtained permit compliance for installation. Tested all connections for leaks, verified proper gas combustion, and confirmed water heater operation. System functioning properly upon completion.
Responded to no cooling call for residential 10-year-old AC system. Upon arrival, provided 30-minute advance notice as requested by customer. Performed diagnostic evaluation of outdoor condensing unit and indoor air handler. Outdoor unit showed normal physical condition with proper placement on concrete pad and functional disconnect box. Indoor unit inspection revealed significant deterioration of heat exchanger components with extensive corrosion, rust accumulation, and yellow staining throughout. Heat exchanger tubes displayed orange-brown rust patches and discoloration indicating advanced age and possible moisture exposure. Interior cabinet showed substantial dirt buildup, rust stains, and greenish-gray deposits on metal surfaces. Wiring bundles and electrical connections were inspected and found intact. Documented conditions with photos for customer review. System age and observed deterioration of critical components noted for discussion of repair versus replacement options.
Completed comprehensive heating tune-up and safety inspection on two 8-year-old furnace systems located in basement. Performed standard maintenance procedures including filter inspection, burner assembly cleaning, heat exchanger examination, blower motor lubrication, and combustion analysis on both units to ensure optimal efficiency and safe operation. Verified thermostat operation and system controls functioning properly, with cooling system actively maintaining setpoint at time of service.
Responded to service call for second floor system experiencing breakdown and aggressive freeze-up conditions. Upon inspection, found extensive ice buildup on evaporator coil preventing proper assessment. Documented severely restricted airflow at return air vent with significant dust and debris accumulation that likely contributed to reduced system performance. Measured system parameters and photographed coil assembly showing copper line connections and finned heat exchanger. Due to extent of ice formation, system requires defrost period before comprehensive leak search can be performed to determine if evaporator coil has failed. Return visit scheduled to complete refrigerant leak detection and provide definitive diagnosis once coil is fully thawed.
Returned to system to replace defective blower motor under warranty, serial number 5923C11541, which had previously been installed in January 2025. Removed and retained failed motor assembly for warranty processing, installed replacement unit, verified proper electrical connections and operation. System restored to full cooling capacity with no additional issues found.
Completed comprehensive electrical inspection of residential service panel and distribution system. Examined main electrical panel housing with standby generator interconnection labeling, verifying proper warning signage and access panel integrity. Inspected internal wiring configuration including multiple circuit conductors (red, black, white, and gray cables), verified proper wire bundling and organization, and confirmed secure wire nut connections on neutral conductors within the distribution box.
Responded to reported slow-draining laundry room drain. Upon inspection, accessed plumbing system through wall-mounted access panel and evaluated drainage components including water filtration system and associated PVC piping. Assessed drain flow and plumbing configuration to identify cause of drainage issue and restored proper function to laundry drain system.
Completed comprehensive Supertune maintenance on ground-level AC unit at condo property. Removed and inspected all return air grilles and filter components, which showed moderate dust accumulation and wear from regular operation. Cleaned metal grilles with oval-pattern mesh design and serviced wooden-framed filter assembly along with gray plastic filter frames. Performed standard tune-up procedures including system inspection, cleaning of components, and verification of proper airflow. All filters and grilles reinstalled and system returned to normal operation.
Completed comprehensive tune-up on 10-year-old AC unit located on side of home. Performed thorough inspection of furnace components including blower motor assembly, gas valve mechanism, and control circuit board; verified all electrical connections and wire terminations were secure. Measured system amperage at 389A using clamp meter to confirm proper electrical operation and component performance within manufacturer specifications.
Completed installation of tankless water heater unit in basement utility area with exposed framing. Unit mounted to wall studs with proper venting and drainage connections established using white PVC piping, including cleanout access point for future maintenance. All electrical connections completed in accordance with code requirements, utilizing existing electrical infrastructure and panel access.
Responded to a no-cooling complaint on a 14-year-old outdoor A/C unit for second opinion evaluation. Upon arrival, connected digital manifold gauges to assess refrigerant pressures and temperatures, which revealed abnormal system readings with high-side pressure at 281.2 psig and discharge temperature at 227.8°F. Documented equipment condition and diagnostic measurements with photographs prior to performing any service work, as previous contractor had implemented temporary repairs that required professional verification.
Completed comprehensive electrical home audit including detailed inspection of main electrical panel and safety systems. Documented circuit breaker configuration with existing handwritten circuit labels identifying dormitory master, AC unit, story circuits, parlor, and expansion circuits. Verified alarm system functionality including strobe light and LED indicator panel in utility area. All electrical components and safety devices were photographed for record-keeping purposes and found to be in functional condition with standard wear patterns consistent with regular residential use.
Completed comprehensive electrical system inspection and audit of residential property. Performed thorough examination of main electrical service panel, verifying proper circuit breaker operation, labeling accuracy, and load distribution across all circuits including family room, master bath, dishwasher, guest bedroom, refrigerator/disposal, furnace, sump pump, stove, living room outlets, and smoke detector systems. Inspected attic-level electrical infrastructure, including junction box connections, wire routing through structural framing, and cable management along ceiling joists. Documented existing wiring conditions, noting yellow-jacketed cables, white conductors, and gray service wires properly secured to wooden beams and plywood sheathing. Verified electrical panel interior components, main breaker specifications, and circuit identification systems are functioning as designed with appropriate safety labeling in place.
Responded to customer complaint of elevated indoor humidity levels exceeding 60%. Inspected 1-year-old residential HVAC system and verified thermostat operation showing 76°F room temperature with setpoint at 83°F. System confirmed operating in cooling mode with auto fan setting. Evaluated air handler access point and verified proper system cycling. Reviewed thermostat programming and discussed humidity control options with customer to address moisture concerns in conditioned space.
