Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Ballwin, MO at a glance
Classic Aire Care has completed 20 jobs in Ballwin, MO in May 2026.
The most recent job was on May 19, 2026.
Classic Aire Care has completed 533 jobs in Ballwin, MO in the last 12 months.
Job Locations and Reviews
Completed comprehensive cooling tune-up on outdoor AC unit located on side of home. Performed standard maintenance protocol including inspection of blower motor assembly, electrical control boards, wiring connections, and verified proper 24VAC power supply to system components. Filter inspected and found in acceptable condition with proper airflow through diamond-pattern pleated media.
Responded to no cooling call on ground-mounted heat pump unit. Upon arrival, found outdoor unit heavily soiled with accumulated dirt, dust, and grime on exterior panels, with significant debris buildup including dried leaves and twigs collected at base. Performed diagnostic assessment and thorough cleaning of condenser coil and exterior components to restore proper airflow and system operation.
Responded to no cooling complaint on 10-year-old outdoor AC unit located in backyard. Upon arrival, utilized Fieldpiece digital manifold gauges to measure system pressures and temperatures. Diagnostic readings revealed low refrigerant charge as the cause of inadequate cooling. Performed leak check, recharged system to manufacturer specifications, and verified proper operating pressures and temperatures. Unit restored to normal cooling operation.
Responded to no cooling complaint on 6-year-old unit where compressor was humming but not starting after circuit breaker tripped. Upon inspection, found compressor locked rotor condition with failed start capacitor preventing proper startup. Replaced defective run/start capacitor, verified proper voltage at contactor, and tested compressor operation. Unit restored to normal cooling operation with compressor running smoothly and proper amperage draw confirmed.
Responded to no cooling call on 15-year-old AC system. Customer reported outdoor unit not running while indoor blower operated normally. Upon arrival, confirmed outdoor condensing unit was not energizing. Performed diagnostic testing and identified failed contactor preventing compressor and condenser fan operation. Replaced defective contactor, restored power to outdoor unit, and verified system cooling properly with normal amperage draws and temperature splits.
Completed comprehensive cooling maintenance and tune-up on a 3-year-old Lennox air conditioning system per Home Depot work order #F59381724. Performed full system inspection of outdoor condenser unit, verified proper operation of compressor and fan motor, cleaned condenser coils, checked refrigerant levels and electrical connections, and confirmed system was cooling effectively with no deficiencies noted. Unit was found in good working condition and left operational upon completion of preventive maintenance service.
Completed cooling system tune-up on a 9-year-old ground-level AC unit. Performed comprehensive inspection of control board and electrical connections, verified all wiring harnesses and terminals were secure, and inspected the air filter which showed moderate dust accumulation consistent with normal operation. All components were found to be functioning properly with no immediate service needs identified.
Returned to complete diagnosis following overnight thaw of frozen evaporator coil. Initial service call found no cooling condition with iced coil and inoperative blower motor. Inspected outdoor condenser unit and verified proper fin condition and cleanliness. Removed access panel to examine internal electrical components including capacitor and associated wiring connections. Documented system conditions with photos for service records.
Installed a 600M humidifier and connected it to the existing S40 thermostat control system, completing all electrical connections and mounting hardware. Performed comprehensive air conditioning maintenance service including filter inspection, system diagnostics, and verification of control board operation. All equipment tested and confirmed operational upon completion.
Completed comprehensive cooling season tune-up on 11-year-old outdoor condensing unit. Performed standard maintenance protocol including coil cleaning, electrical connection inspection, refrigerant charge verification, and operational testing of all components. Unit operating within manufacturer specifications with no deficiencies noted at time of service.
# Tanked Water Heater Installation Successfully completed installation of a new residential tanked water heater in basement utility area. Removed existing unit and installed replacement water heater with proper plumbing connections, including copper supply lines, shut-off valves, and temperature and pressure relief valve piping. Installed expansion tank to accommodate thermal expansion in closed plumbing system. Connected all hot and cold water distribution lines with appropriate fittings and unions for future serviceability. Verified all connections for proper seal and tested system for leaks. Ensured adequate clearance from adjacent HVAC equipment and combustibles per manufacturer specifications and local code requirements. System was filled, purged of air, and brought to operating temperature. Verified proper operation of all safety devices and control systems. Installation completed in compliance with applicable plumbing codes. No permit or inspection sticker required per City of
Completed preventive maintenance tune-up on two residential cooling units, both approximately 10 years old and located on the side of the home. Performed comprehensive inspection of Dynamic air handler in attic space, including filter assessment, electrical connections verification, and visual inspection of all accessible components. Both systems operating within normal parameters upon completion of seasonal maintenance procedures.
Completed comprehensive cooling system maintenance on an 18-year-old GE air conditioning unit. Performed standard AC tune-up procedures including inspection of all major components, cleaning of condenser coils, verification of refrigerant levels, and testing of electrical connections. Verified Emerson programmable thermostat operation, confirming proper communication between thermostat and cooling system with accurate temperature readings at 75°F and setpoint functionality. All systems tested and operating within normal parameters upon completion of preventive maintenance service.
Completed scheduled HVAC tune-up maintenance on single residential unit located at side of house. Performed standard system inspection and replaced air filter with new pleated media filter. Verified proper airflow through return air grille and confirmed filter housing integrity. System operational and running within normal parameters upon completion.
Performed comprehensive cooling maintenance on a 9-year-old air conditioning system. Conducted AC tune-up including refrigerant pressure testing using manifold gauge set to verify proper system charge and operating pressures. Inspected outdoor condenser unit, confirming proper operation of fan assembly and clean condenser coil fins. System tested and operating within normal parameters with no deficiencies noted.
Responded to follow-up service call for frozen air conditioning unit. Recovered and weighed refrigerant from system, measuring 4.43 lbs on calibrated scale to assess charge level and determine if low refrigerant contributed to freeze-up condition.
Responded to service call for non-operational Lennox system displaying error codes C2, A984, and E312. Upon inspection, discovered severe ice accumulation on the evaporator coil and refrigerant lines, indicating a complete system freeze-up. The ice buildup had formed thick, clustered formations along the suction line, preventing proper refrigerant flow and heat exchange. Identified compromised airflow as the primary cause, evidenced by displaced and deteriorated insulation around the air handler components. Assessed the 10-year-old system for underlying issues contributing to the freeze condition, including potential refrigerant charge problems, restricted airflow due to dirty filters or blocked return air, and possible thermostat or control board malfunctions triggering the error codes. Documented the frozen coil condition and insulation displacement with photographs for diagnostic reference. System required complete thawing before further diagnosis and repairs could be performed to r
Responded to service call for 10-year-old Amana furnace located in basement with reported cracked heat exchanger identified during prior inspection. Performed thorough visual assessment and confirmed heat exchanger damage requiring replacement. Documented system condition with photographs showing furnace components, ductwork connections, and surrounding mechanical installations for warranty and repair planning purposes.
Responded to service call for furnace PVC exhaust pipe smoking. Upon inspection, discovered bird nest completely blocking furnace exhaust vent on exterior wall. Removed nesting material consisting of twigs, dried grass, and debris from PVC termination point. Cleared obstruction to restore proper exhaust ventilation and prevent potential carbon monoxide hazard. Verified furnace can now safely operate with unobstructed flue discharge.
Completed comprehensive tune-up service on a single Lennox HVAC unit located at ground level on the side of the home. Performed standard maintenance procedures including inspection of all mechanical components, electrical connections, and refrigerant lines. Verified proper operation of the system and documented equipment condition through photographic documentation of both the indoor air handler unit in the basement utility area and exterior installation components where the unit interfaces with the building structure.
