Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Ballwin, MO at a glance
Classic Aire Care has completed 20 jobs in Ballwin, MO between June 2026 and July 2026.
The most recent job was on July 11, 2026.
Classic Aire Care has completed 533 jobs in Ballwin, MO in the last 12 months.
Job Locations and Reviews
Responded to no cooling call on 10+ year old Carrier system with Infinity Touch thermostat displaying error code 196 (auxiliary input G shutdown fault). Diagnosed intermittent system cycling issue caused by faulty auxiliary input signal triggering safety shutdown. Cleared fault code, tested system operation through multiple cooling cycles, and verified proper communication between thermostat and air handler to restore normal cooling function.
Responded to service call for non-functioning garage coach lights. Diagnosed faulty wall switch controlling two exterior coach light fixtures mounted on garage. Replaced defective switch with new device, restored power to circuit, and verified proper operation of both coach light fixtures. All electrical connections secured per code requirements and system tested successfully.
Responded to no cooling complaint on residential outdoor condensing unit. Upon arrival, connected diagnostic gauges to measure system pressures and temperatures. Readings indicated abnormal operating pressures with suction pressure at 55 PSI, discharge pressure at 302.3 PSI, and temperature differentials showing 12.98°F, 23.5°F, and 43.8°F across various measurement points. Advised customer to keep system off until issue could be properly diagnosed and resolved. Documented findings with photos for service records.
Responded to service call for sound complaint and dehumidification malfunction on recently installed S40 system. Inspected Honeywell zone control damper in attic space and verified proper wiring connections and operational status of zone controller. Evaluated system operation, identified issue with dehumidification settings, and adjusted controls to resolve performance concerns. Verified garage door opener interference was not affecting HVAC operation. System tested and confirmed operating within normal parameters with proper dehumidification function restored.
Responded to service call for loud noise complaint on air conditioning system installed approximately one year ago. Upon arrival, performed diagnostic inspection of the AC unit and verified thermostat operation showing Sensi programmable model maintaining proper communication with system. Identified source of excessive noise, completed necessary repairs to resolve the issue, and verified system returned to normal quiet operation with proper cooling functionality restored.
Completed comprehensive cooling maintenance tune-up on a 9-year-old air conditioning system that was operating properly at time of service. Performed standard preventive maintenance procedures including inspection of outdoor condensing unit, verification of proper airflow through ventilation grille, and evaluation of 25x25x1 air filter which showed clean condition with intact pleated media. All system components inspected and found to be functioning within normal operating parameters.
Responded to main sewer line clog at commercial cosmetic facility. Upon arrival, accessed building's main drain cleanout located in restroom area with floor drain. Successfully cleared blockage in main sewer line, restoring proper drainage throughout the building. System tested and verified operational. Documentation photos taken of work area and drain access point.
Supplied and installed a 50-gallon tall gas water heater in the basement, including necessary gas valve and fittings with flexible 3/8" copper gas flare connections and existing flexible exhaust. Installed 3/4" pressure reducing valve and secured all gas piping to concrete wall per code requirements. Applied for and obtained plumbing permit 26PLU-13662 with proper identification sticker affixed to installation. Additionally addressed kitchen plumbing issue by inspecting and clearing dishwasher drain line connected to garbage disposal assembly under sink.
Responded to no-cool call on 10+ year old unit in side yard where breaker had tripped and water was pooling under equipment with frozen coil. Upon arrival, found evidence of drainage issues causing water accumulation and ice formation on evaporator coil. Inspected control board wiring and electrical connections, identifying compromised wire terminals with visible corrosion on housing panel. Performed electrical diagnostics and rewired control board connections using proper wire nuts to ensure secure terminations. Addressed drainage blockage causing water backup and verified all electrical connections were properly secured to prevent future tripping. Unit restored to normal operation with proper cooling function and drainage flow confirmed.
Responded to no cooling complaint on residential air conditioning system. Upon inspection, found evaporator coil completely frozen with heavy ice buildup on refrigerant lines. Identified restricted airflow as primary cause due to severely clogged air filter. Shut down system to allow coil to thaw completely. Replaced dirty air filter with new filter. Once thawed, restarted system and verified proper airflow across evaporator coil. Monitored temperature differential and confirmed system cooling properly with no further ice formation. Advised customer on importance of regular filter maintenance to prevent future freezing issues.
Responded to callback for non-operational air conditioning unit. Accessed outdoor unit's control board assembly and inspected electronic components, wiring connections, and control circuitry. Documented internal condition of control system including circuit board, terminal connections, and sensor wiring for diagnostic purposes.
Responded to no cooling complaint on residential split system over 10 years old located at ground level. Upon arrival, performed diagnostic evaluation using digital manifold gauges to measure system pressures and temperatures. Readings indicated potential refrigerant charge issues or system performance problems requiring further assessment and corrective action to restore proper cooling operation.
# HVAC Service Report - No Cool Call Responded to no cooling complaint on 13-year-old residential air conditioning system. Upon arrival, performed complete system diagnostic including visual inspection of outdoor condenser unit, electrical component testing, and refrigerant pressure analysis. Condenser unit exterior showed normal weathering consistent with age, with louvers and grilles intact but displaying accumulated debris and dust buildup from outdoor exposure. Identified failed compressor as root cause of complete system failure. Compressor tested with no electrical continuity and showed no attempt to start during diagnostic procedures. Verified proper voltage supply to unit, confirmed contactor operation, and ruled out capacitor failure through testing. Run capacitor tested within acceptable range, and all safety controls functioning properly. Due to age of system and cost-effectiveness analysis, recommended full system replacement rather than compressor replacement on 13-year
Responded to no-cooling complaint on 10+ year old outdoor unit with reported whirling sound following a thud noise. Upon inspection, discovered failed compressor with internal mechanical failure causing the audible sounds and complete loss of cooling capacity. Accessed electrical compartment and tested capacitor, contactor, and all electrical connections, confirming proper voltage and that the issue was isolated to the compressor itself. Provided customer with repair options including compressor replacement versus full system replacement given the age of the unit.
Responded to no-cool complaint on recently installed system where thermostat would not cool below 80 degrees. Upon arrival, performed diagnostic inspection of outdoor condenser unit and found heavily soiled air filter restricting airflow to the system. Cleaned and serviced the condenser unit, addressing the clogged filter that was preventing proper heat exchange and limiting cooling capacity. System tested and confirmed operational, now cooling properly below 80 degrees as designed.
Responded to install callback for high humidity concerns following recent air conditioning system installation. Verified refrigerant charge levels and system operation, confirmed proper ecobee thermostat wiring and configuration for humidity control settings. System found operating within manufacturer specifications with adequate refrigerant levels; reviewed thermostat programming with occupant to optimize dehumidification performance during cooling cycles.
Installed dedicated electrical circuit to HVAC system to ensure proper power supply and system operation. Work completed according to electrical code requirements, with all connections properly secured and tested for functionality.
Responded to service call for no pilot light on one of two tanked water heaters in basement. Upon inspection, determined existing unit was beyond economical repair. Installed new 75-gallon gas tall water heater as replacement. Connected gas supply line, installed new temperature and pressure relief valve with discharge piping to code, and established proper venting through existing ductwork system. Integrated unit into existing plumbing infrastructure with appropriate shut-off valves and unions for future serviceability. Tested all connections for leaks, verified proper combustion and venting, and confirmed adequate hot water delivery to fixtures throughout home. Unit operational and performing to manufacturer specifications upon completion.
Responded to service call for non-functioning three-way light switch in master bathroom. Diagnosed electrical issue with three-gang switch configuration controlling recessed ceiling lighting fixtures. Troubleshot wiring connections, identified faulty switch mechanism, and restored proper operation to the three-way switching system controlling five recessed can lights installed in the angled ceiling.
Completed comprehensive cooling system tune-up on 6-year-old outdoor AC unit. Inspected and documented air filter condition showing moderate dust accumulation in pleats, examined electrical control boards and wiring connections, and verified all system components for proper operation. Unit tested and confirmed operational within manufacturer specifications.
